Concrete is the backbone of any construction venture. This is true whether it’s a new home in Tulsa or a commercial structure that will stand the test of time. It can be used in many areas of the building process to help make sure that structures stay sound, safe, and long-lasting. But there are a few issues that aren’t as common but can be just as problematic as concrete in other areas of the building process.

Cracks – While concrete is very durable, there are times when the structure needs to be supported more firmly. This can lead to cracks in the concrete over time. To avoid this, check for cracks around the edges of any doorways and windows that your concrete may hit. If you also notice large cracks anywhere inside your home, this too can be a problem and will most likely need to be repaired.

Water Leaks – Even though concrete is quite sturdy, it can still be damaged by water or moisture. Even the slightest amount of water can cause concrete to expand and contract, causing cracks and large amounts of water to leak out onto the ground. If you have a basement in your home, this can be one of the worst possible problems that can occur with concrete floors. To avoid this, place heavy shelving on the bottom of all stairs and use heavy-duty shutters or curtains to keep out water.

Fissures – Just like water, concrete can be damaged by moisture. While it’s rare, there is the possibility that a small piece of concrete chips or splinters from the floor. However, the most common and noticeable crack is the crack that forms where water or other liquids penetrate the surface of the concrete. These leaks are usually easy to spot because they’re so small. To prevent water penetration, placemats beneath any wet surfaces in your home, and always remember to seal your concrete if you have to leave them wet for any length of time. The cracking will subside as the solution wears away, and you’ll finally be left with a smooth, beautiful concrete that will stand up to wear for years to come.

Sun/UV Damage – Even the best concrete polishing in Tulsa won’t protect your floor from the damaging effects of the sun and the damaging ultraviolet rays that fall upon it day after day. When you polish your concrete, you usually include an ultraviolet inhibitor. Unfortunately, these don’t work very well. Over the years, the sun can slowly eat away at the concrete, causing it to crack and crumble. This does not happen with well-pigmented concrete, which is why it is so important to seal your floors.

Seal it Right – After the initial coating of the sealant, the next step is to apply another, thicker layer of sealant. Once this second coat is applied, it becomes too late. You must never apply sealants to a cracked or chipped floor. If any cracks or chips appear on your floor, you should immediately call Concrete Tulsa to have the concrete sealed. Sun, water, and UV damage to the concrete are all too real.

Repair or Replacement – If a crack or chip occurs on your floor, you may be tempted to fix the problem yourself. While some small, invisible cracks may be easy to fix with a hammer and a few nails, larger cracks should be left to the professionals. It’s too risky for you to climb up on a ladder and begin drilling into a concrete structure. Plus, concrete repair isn’t exactly cheap.

If you’ve already purchased or made your own repairs, the best way to ensure the longevity of your floors is to invest in a sealer. By doing this, you’ll keep your concrete safe from the sun, water, and damage. Plus, the sealer will protect your investment from future damage as well. When you seal your concrete floors, you’ll be able to enjoy them for many years to come.